이근재 사진

이근재 | 대학원 에너지공학과(천) (공학관)

  • 직급:
    부교수

학력

  • [2002] 학사 한양대학교(ERICA캠퍼스) / 금속재료공학과 / 재료공학
  • [2004] 석사 한양대학교 / 금속재료공학과 / 금속나노분말
  • [2009] 박사 한양대학교 / 정밀화학공학과 / 기능성나노소재

주요경력

  • UC Riverside (2009-08-01)
  • 고등기술연구원 (2011-08-01)

주요연구분야

- Device Fabrication and Characterization
- Growth and Deposition
- Ink Synthesis Based on Nanoparticle or Metal-organic Complex for Printed Electronics
- Material Recycling and Materialization
- Nano-device Fabrication and Characterization
- Nanostructured Materials for Thermoelectric and Functional Materials

연구업적

  • 일반논문[20240201] The effects of the polymers as a sacrificed material for the hydroxyapatite powder synthesized by an ultrasonic spray pyrolysis process
  • 일반논문[20231226] MLCC에서 회수된 산화니켈 분말의 전기방사공정을 통한 나노와이어 제조
  • 일반논문[20221201] 초음파 분무 열분해법을 이용한 고체전해질용 Lithium Lanthanum Titanium Oxide 제조
  • 일반논문[20221001] Effects of synthesis temperature and polymer addition on the phase and morphology of molybdenum oxide by ultrasonic spray pyrolysis
  • 일반논문[20211001] SYNTHESIS AND CHARACTERIZATION OF MoO3 NANO PARTICLE BY CONTROLLING VARIOUS GROWTH CONDITIONS IN SOLUTION COMBUSTION METHOD
  • 일반논문[20211001] DISSOLUTION BEHAVIOR OF METAL IMPURITIES AND IMPROVEMENT OF RECLAIMED SEMICONDUCTOR WAFER CLEANING BY ADDITION OF CHELATING AGENT
  • 일반논문[20210701] Manufacture of high sensitive Ag-Fe3O4-PDMS nanocomposite pressure sensor through morphology control of conductive filler
  • 일반논문[20210701] Effective surface modification method of silver nanowires with alkaline solutions for enhancing electrical property of silver transparent electrode
  • 일반논문[20210201] Structural effects of crack-free PMMA/Silane/BaSO4-TiO2 composite coating composed of bimodal particles via electrophoretic deposition on titanium substrate
  • 일반논문[20210201] 착화제 첨가에 따른 웨이퍼 세정 용액 특성 분석 및 금속 용해 거동
  • 일반논문[20201001] 전구체 농도에 따른 MoO3 나노 분말 합성 및 핵생성 거동
  • 일반논문[20200901] Grinding behavior of WO3, NiO, Fe2O3 by ultrasonic milling parameters control and preparation of nanocomposite powder
  • 일반논문[20190630] 초음파 볼밀링 공정에 의한 용매 점도 특성에 따른 텅스텐계 합금 분쇄 거동
  • 일반논문[20190501] Effect of chloride ion on synthesis of silver nanoparticle using retrieved silver chloride as a precursor from the electronic scrap
  • 일반논문[20190415] Hydrothermal synthesis of tellurium nanorods by using recovered tellurium from waste electronic devices
  • 일반논문[20180101] Gas sensing properties of powder prepared from waste thermoelectric devices by wet reduction process
  • 일반논문[20170901] Characterization of stainless steel surface processed using electrolytic oxidation and titanium complex ion solution
  • 일반논문[20170801] LTCC 전극공정부산물 침출 용액으로부터 은 회수 및은 나노입자 제조
  • 일반논문[20170401] 회수된 Bi2Te3의 계면활성제에 따른 합성 및 성장 거동
  • 일반논문[20170401] Surface treatment of stainless steel by electrolytic oxidation and deposition of titanium complexing ion solution to improve metal-ceramic adhesion
  • 일반논문[20170301] Chemical separation of p-and n-type thermoelectric chips fromwaste thermoelectric module and valorization through synthesis of Bi2Te3 nanopowder: a sustainable process for synthesis of thermoelectric materials
  • 일반논문[20170201] Full densification of inkjet-printed copper conductive tracks on a flexible substrate utilizing a hydrogen plasma sintering
  • 일반논문[20170101] Synthesis of Cu3(MoO4)2(OH)2 nanostructures by simple aqueous precipitation: understanding the fundamental chemistry and growth mechanism
  • 일반논문[20161001] Hydrazine vapor-based rapid and low temperature post-processing for inkjet printed conductive copper patterns
  • 일반논문[20160801] 폴리올 공정과 액상 환원 공정에 따른 은 입자 제조및 특성 평가
  • 일반논문[20151201] 표면전하를 이용한 SiO2/PMMA 분말의 분산 제어 및 평가
  • 일반논문[20150901] Recycling of GaN, a Refractory eWaste Material: Understanding the Chemical Thermodynamics
  • 일반논문[20150801] A Novel Method for Fine Patterning by Piezoelectrically Induced Pressure Adjustment of Inkjet Printing
  • 일반논문[20150701] Valorization of GaN based metal-organic chemical vapor deposition dust a semiconductor power device industry waste through mechanochemical oxidation and leaching: A sustainable green process
  • 일반논문[20150601] ALUMINUM OXIDE FORMATION ON FECRAL CATALYST SUPPORT BY ELECTRO-CHEMICAL COATING
  • 일반논문[20141201] 입도와 흑연 첨가제에 따른 유해 입자 및 가스 동시제거용세라믹필터 특성평가
  • 일반논문[20141101] Synthesis of CdSe/ZnSe quantum dots passivated with a polymer for oxidation prevention
  • 일반논문[20141001] Synthesis of the Thermoelectric Nanopowder Recovered from the Used Thermoelectric Modules
  • 일반논문[20141001] Improvement of Dispersion Stability and Optical Properties of CdSe/ZnSe Structured Quantum Dots by Polymer Coating
  • 일반논문[20140801] The influence of polarity of electrodeposited Cu2O thin films on the photoelectrochemical performance
  • 일반논문[20140601] Electrodeposition of Bi2Te3 Nanowire Arrays with Uniform Length and Controlled Composition in Anodic Aluminum Templates
  • 일반논문[20140301] Influence of Solidification Behavior of a Sublimable Vehicle in the Freeze-Drying Process of WO3/Camphene Shiny on Pore Structure
  • 일반논문[20140201] Preparation and Characterizations of Lithium Iron Borate Nano-sized Powders via Aerosol and Thermal Process
  • 일반논문[20130901] Synthesis and characterization of LiMnBO3 cathode material for lithium ion batteries
  • 일반논문[20130601] Inkjet printed transparent conductive films using water-dispersible single-walled carbon nanotubes treated by UV/ozone irradiation
  • 일반논문[20130101] Estimation of dispersion stability of UV/ozone treated multi-walled carbon nanotubes and their electrical properties
  • 일반논문[20120901] Structural evolution of Ag-Au nanoplates by pH controlled galvanic displacement
  • 일반논문[20120901] Synthesis and characterization of polycrystalline Sr, Mg-doped LaGaO3 nanowires using electrospinning method
  • 일반논문[20110801] Effect of UV/ozone treatment on interactions between ink-jet printed Cu patterns and polyimide substrates
  • 일반논문[20110801] Synthesis of ultra-long hollow chalcogenide nanofibers
  • 일반논문[20110601] Synthesis of chalcogenide ternary and quaternary nanotubes through directed compositional alterations of bacterial As-S nanotubes
  • 일반논문[20110201] Tunable Synthesis of Cuprous and Cupric Oxide Nanotubes from Electrodeposited Copper Nanowires
  • 일반논문[20110101] Preparation and Characterization of TiO2 Coated Fe Nanofibers for Electromagnetic Wave Absorber
  • 일반논문[20101201] Ink-jet printing of Cu conductive ink on flexible substrate modified by oxygen plasma treatment
  • 일반논문[20100901] Ultra-long bismuth telluride nanoribbons synthesis by lithographically patterned galvanic displacement
  • 일반논문[20100801] Effect of Complex Agent on Characteristics of Copper Conductive Pattern Formed by Ink-jet Printing
  • 일반논문[20100501] Growth Factors for Silver Nanoplates Formed in a Simple Solvothermal Process
  • 일반논문[20100501] Fabrication and Ink-Jet Patterning of Copper Nanoparticles with Improved Dispersion Stability
  • 일반논문[20100201] Investigation of shape controlled silver nanoplates by a solvothermal process
  • 일반논문[20100101] Iron Nanofibers Synthesized by the Electrospinning Method for Use as a GHz Band Electromagnetic Wave Absorber
  • 일반논문[20091001] Silicon Solar Cell with Nanoporous Structure Formed on a Textured Surface
  • 일반논문[20090101] Preparation and Gas Sensitivity of SnO2 Nanopowder Homogenously Doped with Pt Nanoparticles
  • 지식재산권[20160728] 촉매 지지를 위한 금속 지지체의 표면 처리 방법 및 촉매 지지 구조 제조 방법